Chappell Supply of Texas

HSP Series

Gasoline - Direct Drive

HSP-2003-3MGH Pressure Washer HSP-3004-3MGH Pressure Washer
HSP-2003-3MGH HSP-3004-3MGH

 

Features:

  1. Energy efficient top-fired, dual spiral coil with powder heat exchanger

  2. No. 1 or No. 2 diesel or kerosene fired burner

  3. Stainless-steel and brass unloader valve (adjustable on HSP-2003-3MGH/3MGV)

  4. Thermal relief valve

  5. Performance-proven OHV engine with low oil protection and recoil start

  6. Direct drive triplex ceramic piston pump with forged brass manifold (CAT pumps on 1MGH/1MGV models)  (AR pumps on 3MGH/3MGV models                      

  7. Patented electro magnetic firing (EMF) system

  8. Polyethylene burner fuel tank

  9. Racor Fuel filter/water separator

  10. Built-in low pressure detergent injection

  11. 3/8 inch x 50 foot steel wire-braided pressure hose with screw connects, swivel and bend restrictors

  12. Professional-grade insulated trigger gun with safety lock-off

  13. Adjustable pressure-insulated dual lance with 15-degree fixed and detergent nozzles

  14. Wand holder

  15. Reinforced powder coated steel tube frame with center balance lifting hook

  16. Easy coil drain

  17. Pneumatic tires with tubes (4)

  18. Solid steel threaded axles

Additional features:

  • Temperature rise 150ºF/66ºC maximum above ambient

  • Pressure and high limit safety controls

  • Complete system diagnostic board

    •

     

    Patented EMF System

    1. Engine sheave, dual set screw mount, Maintains proper alignment of pump shaft key preventing unnecessary wear of pump and engine shaft.

    2. The belt tension sheave creates proper belt tension so fuel pump discharges  fuel upon demand.

    3. The long lasting, non-corrosive flexible drive coupler protects EMF system if fuel pump locks up.

    4. Suntec brand fuel pump is a durable high quality pump that will deliver No. 1 diesel fuel, No. 2 diesel fuel or kerosene.

    5. Stator coil/magnets are a low maintenance system that provides solenoid control voltage.

    6. Fan provides burner air for proper combustion and clean exhaust smoke.  It has an easily accessible air flow control.

    7. Ignition coil provides voltage to electrodes for proper spark voltage, allowing accurate ignition of fuel every time trigger is pulled.  The ignition coil has a long life, is easily replaced, and has a proven track record in the industry.

    CSA certification stamp  CETA certification stamp
    Patented EMF System diagram

    Warranty Information

    One (1) year limited parts and labor warranty.

    Three (3) year limited warranty on coil.

    Five (5) year limited warranty on pump.

     

     

     

    * Note:  Unit Dim. (L x W x H) for HSP-2003,2403 -  38" x 30" x 38"

    Unit Dim. (L x W x H) for HSP-3003,3004,3504 -  43" x 30" x 41" *

    EMF Drive is belt driven

    Shipping weight between  381  lbs.  &  551  lbs.

    Net weight between  265  lbs.  &  430  lbs.

     
    Model # PSI GPM HP Engine Pump Fuel Tank Cap (gal) Burner Tank Cap  (gal) Burner Cons (gph)
    HSP-2003-3MGH 2000 2.7 5.5 Honda AR 0.97 4.0 1.48
    HSP-2003-3MGV 2000 2.7 6.0 Vanguard AR 1.05 4.0 1.48
    HSP-2003-1MGH 2000 2.7 5.5 Honda CAT 0.97 4.0 1.48
    HSP-2003-1MGV 2000 2.7 6.0 Vanguard CAT 1.05 4.0 1.48
    HSP-2403-3MGH 2400 2.6 6.5 Honda AR 0.97 4.0 1.48
    HSP-2403-1MGH 2400 2.6 6.5 Honda CAT 0.97 4.0 1.48
    HSP-3003-3MGH 3000 2.6 9.0 Honda AR 1.59 5.5 1.84
    HSP-3003-3MGR 3000 2.6 9.0 Robin AR 1.59 5.5 1.84
    HSP-3003-3MGV 3000 2.6 9.0 Vanguard AR 1.59 5.5 1.84
    HSP-3004-3MGH 3000 3.5 11.0 Honda AR 1.70 5.5 2.10
    HSP-3004-3MGV 3000 3.5 11.0 Vanguard AR 1.70 5.5 2.10
    HSP-3004-1MGH 3000 3.5 11.0 Honda CAT 1.70 5.5 2.10
    HSP-3004-1MGV 3000 3.5 11.0 Vanguard CAT 1.70 5.5 2.10
    HSP-3504-3MGH 3500 3.3 13.0 Honda AR 1.70 5.5 2.10
    HSP-3504-3MGV 3500 3.3 13.0 Vanguard AR 1.70 5.5 2.10
    HSP-3504-1MGH 3500 3.3 13.0 Honda CAT 1.70 5.5 2.10
    HSP-3504-1MGV 3500 3.3 13.0 Vanguard CAT 1.70 5.5 2.10
    Options:
    Electric start (HX-0097 for 11 HP Honda)
    Electric start (HX-0098 for 13 HP Honda)
    Rain cap - dual exhaust (20-9050)

    Chappell Supply of Texas Site Map

     

    For more information call 1-877-439-8500

     

    Biological Wastewater Treatment Pressure Washers Water Recycling Systems
    Aqueous Parts Washers Explosion-Proof Pressure Cleaning System Heavy Duty Industrial Cleaning Systems
    Water Cannon System Mosmatic Corp. Pump Index Latimat Containment System
    Hose Product Line Industrial Steam Cleaning Tanks & Tank Accessories
    Return to Chappell Supply of Texas Main Page

     

     

    Chappell Supply of Texas

    1-877-439-8500

    548 S Saginaw Blvd

    Saginaw, TX  76179

           Phone: 817-439-2200      Fax:  817-439-2400

             email:   info@chappellsupplyoftexas.com

     
       

    Site Hosted by:            Internet Techs.net