Chappell Supply of Texas

Natural Gas / Propane Heated

Pressure Cleaning Systems

 

***Pressure Cleaning Systems and Model Numbers vary according to the needs of each customer.***

 

G25/P25 Series G40/P40 Series
EES420G25A image

EES420G25A

With Optional CAT Pump

 

 EES12182G40AS image

 **Custom Built Machine**

EES12182G40AS

790,000 BTUH input

With Optional CAT Pump  & SRA Surge Relief Protection

 

G25/P25 Series

Features:

  • Trigger Gun activated start/stop control circuit with solid state time delay shutdown

  • Belt-driven, oil-bath plunger pump with high efficiency motor thermo-probe pump protection

  • High efficiency, natural gas or propane fired heater with soft opening gas valve, copper and bronze straight tube waterways, bronze header, stainless steel burner assembly, 7" diameter draft diverter and stack temperature sensor

  • Heat Exchanger Tank with #316 Stainless Steel Heat Exchanger coil, thermal insulation and factory set temperature and pressure relief valve

  • Heat Exchanger Tank allows for continuous recovery to maintain optimum performance

  • No hard water scale buildup in heat exchanger coil/ no dirty carbon coil water

  • Thermal Blanket wrapped heat exchanger tank provided for high efficiency input/output

  • Ideal for food processing, pharmaceutical and any in-plant cleaning application

    •

    EES420G25A  FLOW

    EES420G25A FLOW image

     
    CSA cerification stamp CSA Blue Flame certification stamp  CETA member stampMEMBER

     

     

    Model Flow GPM Pressure PSI Motor HP 230V-1PH Total 208V-3PH Amp 460V-3PH 575V - 3PH Gas/Propane
    EES420G25A 4 1900 5 23 15.6 7.6 6.3 GAS
    EES420P25A PROPANE
    EES429G25A 4 2900 7.5 34 23.5 11.2 9.2 GAS
    EES429P25A PROPANE
    EES562G25A 5.6 2000 7.5 34 23.5 11.2 9.2 GAS
    EES562P25A PROPANE
    EES543G25A 5.4 3000 10 - 30 14.1 11.5 GAS
    EES543P25A PROPANE
    NOTE:   When ordering, please indicate Natural Gas (G25) or Propane (P25).

     

    OPTIONS
    Options Description
    E3-SS #316 Stainless Steel Pump Cover
    E3S8-SS #316 Stainless Steel Pump Cover for 15 & 20 HP Models
    E3ELV Louvered End Covers
    E3ES8LV Louvered end Covers for 15 & 20 HP Models
    ECWBG Cold Water Bypass System, instant change from hot to cold water applications
    ESRA Surge Relief Assembly (must be installed on the domestic water supply when the supply line has a back flow preventer, pressure reducing or check valve present)
    ESA Nitrogen Charged pump pulsation surge arrestor
    ELWPP-1/2 Low Inlet water pressure protection - 1/2" fittings
    ELWPP-3/4 Low Inlet water pressure protection - 3/4" fittings
    EQS1/QS2 Trigger Gun controlled/flow switch activated quick start system
    EARS Automatic Re-light system to ensure pilot light remains on
    EETM Hour Meter
    ECLS/CLS-3 Cleaning Station Assembly, (for multi-user applications)  c/w 1/2" ball valve and hose quick connect
    ECS-1/CS1-3 Chemical Injection Station (for multi-user applications) c/w  adjustable chemical injector, wash/rinse control valve and swivel connection
    ECS1-SSB/ CS1-3SSB Chemical Injection Station (for multi-user applications) housed in lockable stainless steel panel

     

     

    G40/P40 Series

     

     

    EES620G40A image

     **Custom Built Machine**

    EES620G40A

    395,000 BTUH input

    With Optional SRA Surge Relief Protection & ARS Auto Relight  System

     

    		  

    EES12182G40AS image

     **Custom Built Machine**

    EES12182G40AS

    790,000 BTUH input

    With Optional CAT Pump  & SRA Surge Relief Protection

     

    Features:

  • Belt driven, oil bath plunger pump

  • Trigger gun activated start/stop control circuit with solid state time delay shutdown

  • Automatic High Temperature shut down (thermo probe)  for pump protection

  • Ideal Central systems with multi station outlets

  • Dual Lance gun with 50ft. high pressure hose and downstream chemical injection

  • Compact design - 45" L x 38" W x 52" H

  • Modulating gas thermostat control for steady temperature  output up to 200ºF

  • Adjustable high temperature limit control

  • 395,000 BTUH Input

  • 3/4" schedule 80 heating coil with stainless wrap

  • Draft hood included for 10" Flue

  • Factory set safety relief valve

  • CSA approved / full safety controls

  • Cold water through pump for long life

    •

     
    CSA certification stamp CSA Blue Flame certification stamp  CETA member stampMEMBER

     

    Model Flow GPM Pressure PSI Motor HP 230V-1PH Total 208V-3PH Amp 460V-3PH 575V - 3PH Gas/Propane
    EES411G40A 4 1100 3 17 9.8 4.4 3.5 GAS
    EES411P40A PROPANE
    EES420G40A 4 1900 5 22 14.6 6.6 5.3 GAS
    EES420P40A PROPANE
    EES429G40A 4 2900 7.5 33 22.5 10.2 8.2 GAS
    EES429P40A PROPANE
    EES543G40A 5.3 3000 10 - 29 13.1 10.5 GAS
    EES543P40A PROPANE
    EES562G40A 5.6 2000 7.5 33 22.5 10.2 8.2 GAS
    EES562P40A PROPANE
    EES612G40A 6 1200 5 22 14.6 6.6 5.3 GAS
    EES612P40A PROPANE
    EES620G40A 6 2000 7.5 33 22.5 10.2 8.2 GAS
    EES620P40A PROPANE
    EES812G40A 8 1200 7.5 33 22.5 10.2 8.2 GAS
    EES812P40A PROPANE
    EES820G40A 8 2000 10 - 29 13.1 10.5 GAS
    EES820P40A PROPANE
    EES830G40A 8 3000 15 - 40 18.1 14.5 GAS
    EES830P40A PROPANE
    NOTE:   When ordering, please indicate Natural Gas (G40) or Propane (P40).
    EES812, EES820 & EES830 includes upstream chemical injection and 2 single lance gun/hose assemblies.

     

     

    OPTIONS
    Options Description
    E3-SS #316 Stainless Steel Pump Cover
    E3S8-SS #316 Stainless Steel Pump Cover for 15 & 20 HP Models
    E3ELV Louvered End Covers
    E3ES8LV Louvered end Covers for 15 & 20 HP Models
    ECWBG Cold Water Bypass System, instant change from hot to cold water applications
    ECWBB Cold Water Blasting System (to bypass the heater for cold water blasting applications) includes extra 50' x 1/2" high pressure hose and water blast gun with side handle.
    EARS Automatic Re-light system to ensure pilot light remains on
    ESRA Surge Relief Assembly (must be installed on the domestic water supply when the supply line has a back flow preventer, pressure reducing or check valve present)
    ESA Nitrogen Charged pump pulsation surge arrestor
    ELWPP-1/2 Low Inlet water pressure protection - 1/2" fittings
    ELWPP-3/4 Low Inlet water pressure protection - 3/4" fittings
    EQS1/QS2 Trigger Gun controlled/flow switch activated quick start system
    EETM Hour Meter
    ECLS/CLS-3 Cleaning Station Assembly, (for multi-user applications)  c/w 1/2" ball valve and hose quick connect
    ECS-1/CS1-3 Chemical Injection Station (for multi-user applications) c/w  adjustable chemical injector, wash/rinse control valve and swivel connection
    ECS1-SSB/ CS1-3SSB Chemical Injection Station (for multi-user applications) housed in lockable stainless steel panel
    E2G40 Additional G40 Heater with extended frame for total BTUH input of  790,000

    Chappell Supply of Texas Site Map

     

    For more information call 1-877-439-8500

     

    Biological Wastewater Treatment Pressure Washers Water Recycling Systems
    Aqueous Parts Washers Explosion-Proof Pressure Cleaning System Heavy Duty Industrial Cleaning Systems
    Water Cannon System Mosmatic Corp. Pump Index Latimat Containment System
    Hose Product Line Industrial Steam Cleaning Tanks & Tank Accessories
    Return to Chappell Supply of Texas Main Page

     

     

    Chappell Supply of Texas

    1-877-439-8500

    548 S Saginaw Blvd

    Saginaw, TX  76179

           Phone: 817-439-2200      Fax:  817-439-2400

             email:   info@chappellsupplyoftexas.com

     
       

    Site Hosted by:            Internet Techs.net