Chappell Supply of Texas

General Pump

Extreme High Pressure Pumps,  Jetting/Intermittent Pumps,  Hydraulic Pumps

 

Extreme High Pressure Pumps

 

VH SERIES          VH SERIES pump image

Triplex Plunger Pump (must be pressure fed).

  • Max. Inlet Pressure 145 PSI  
  • Max. Fluid Temperature:  86ºF
  • Inlet Port Thread:  3/4"  BSP-F
  • Discharge Port Thread:  1/2" BSP-F
  • Shaft Diameter:  1.378"/35 mm
  • Pump Dimensions:  22.7" x 17.7" x 8.3"
  • Crankcase Oil Capacity: 127 oz.
  • Stroke:  1,575"/40 mm
    •
    Note:  Shipping weight 185 lbs.

    Click here for Owners Manual  

     
    Item # GPM PSI RPM BORE HP DYNAMIC MIN INLET
    VH12 2.6 17500 750 .472"/12mm 31.2 EBHP 90 PSI
    VH14 3.6 14500 750 .551"/14mm 35.8 EBHP 90 PSI
    VH16 4.7 10800 750 .630"/16mm 34.8 EBHP 90 PSI

     

    VS SERIES          VS SERIES pump image

    High Pressure Triplex Plunger Pump (must be pressure fed).

  • Max. Inlet Pressure 75 PSI  
  • Max. Fluid Temperature:  854ºF
  • Inlet Port Thread:  1 1/2"  G
  • Discharge Port Thread:  1/2" G
  • Shaft Diameter:  1.378"/35 mm
  • Pump Dimensions:  33.6" x 14.7" x 12.45"
  • Crankcase Oil Capacity: 10.5 quarts
  • Stroke:  2.36"/60 mm
    •

     
    Note:  Shipping weight 618 lbs.

    Click here for Owners Manual

     
    Item # GPM PSI RPM BORE HP DYNAMIC MIN INLET
    VS1622 6.9 21750 2200 .630"/16mm 102.8 EBHP 45 PSI
    VS1822 8.7 17400 2200 .709"/18mm 103.7 EBHP 45 PSI
    VS2022 10.8 13050 2200 .787"/20mm 96.5 EBHP 45 PSI
    VS2222 12.9 10800 2200 .868"/22mm 95.4 EBHP 45 PSI
    VS2422 15.6 8700 2200 .945"/24mm 93.0 EBHP 45 PSI
     
    VS1618 7.1 21750 1800 .630"/16mm 105.8 EBHP 45 PSI
    VS1818 9.0 17400 1800 .709"/18mm 107.3 EBHP 45 PSI
    VS2018 11.1 13050 1800 .787"/20mm 99.2 EBHP 45 PSI
    VS2218 13.5 10800 1800 .868"/22mm 99.9 EBHP 45 PSI
    VS2418 16.1 8700 1800 .945"/24mm 95.9 EBHP 45 PSI
     
    VS1615 7.1 21750 1500 .945"/16mm 105.8 EBHP 45 PSI
    VS1815 9.0 17400 1500 .709"/18mm 107.3 EBHP 45 PSI
    VS2015 11.1 13050 1500 .787"/20mm 99.2 EBHP 45 PSI
    VS2215 13.2 10800 1500 .868"/22mm 99.6 EBHP 45 PSI
    VS2415 15.8 8700 1500 .945"/24mm 94.2 EBHP 45 PSI

     

    SH SERIES          SH SERIES pump image

    Triplex Plunger Pump with Gearbox (must be pressure fed).

  • Max. Inlet Pressure 100 PSI  
  • Max. Fluid Temperature:  86ºF
  • Inlet Port Thread:  1 1/2"  BSP-F
  • Discharge Port Thread: 3/4" BSP-F
  • Shaft Diameter:  1.969"/50 mm
  • Pump Dimensions:  42.4" x 25.8" x 13.7"
  • Crankcase Oil Capacity: 467 oz.
  • Stroke:  3.543"/90 mm
    •
    Note:  Shipping weight 840 lbs.

    Click here for Owners Manual 

     
    Item # GPM PSI RPM BORE HP DYNAMIC MIN INLET
    SH2001 11.3 20300 1500 .787"/20mm 157.1 EBHP 90 PSI
    SH2017 11.6 17400 1750 .787"/20mm 138.2 EBHP 90 PSI
    SH2201 13.7 15950 1500 .866"/22mm 159.7 EBHP 90 PSI
    SH2217 14.0 15950 1750 .866"/22mm 152.9 EBHP 90 PSI
    SH2401 16.3 13800 1500 .945"/24mm 154.1 EBHP 90 PSI
    SH2417 16.6 13800 1750 .945"/24mm 156.9 EBHP 90 PSI
    SH2601 19.2 11600 1500 1.024"/26mm 152.5 EBHP 90 PSI
    SH2617 19.5 11600 1750 1.024"/26mm 154.9 EBHP 90 PSI
    SH2801 22.3 10150 1500 1.102"/28mm 155.0 EBHP 90 PSI
    SH2817 22.7 10150 1750 1.102"/28mm 157.8 EBHP 90 PSI
    SH3001 25.6 8700 1500 1.181"/30mm 152.5 EBHP 90 PSI
    SH3017 25.9 8700 1750 1.181"/30mm 154.3 EBHP 90 PSI

     

     

    Jetting/Intermittent Pumps

     

    HES  SERIES          HDS SERIES pump image

    Triplex Plunger Pump for Jetting (intermittent use).

  • Max. Inlet Pressure 45 PSI  
  • Max. Fluid Temperature:  140ºF
  • Inlet Port Thread:  1"  NPT-F
  • Discharge Port Thread:  3/4" NPT-F
  • Shaft Diameter:  1.378"/35 mm
  • Pump Dimensions:  20.4" x 17.7" x 8.1"
  • Crankcase Oil Capacity: 127 oz.
  • Stroke:  1,575"/40 mm
    •
    Note:  Shipping weight 145 lbs.

    Click here for Product Manual

     
    Item # GPM PSI RPM BORE HP Min. Inlet
    HES25A 18.0 4000 1150 .984"/25mm 49.3 EBHP 5.1 PSI

     

    KLS  SERIES          KLS SERIES pump image

    Triplex Plunger Pump for Jetting (intermittent use).

  • Max. Inlet Pressure 45 PSI  
  • Max. Fluid Temperature:  140ºF
  • Inlet Port Thread:  1 1/2"  NPT-F
  • Discharge Port Thread:  1" NPT-F
  • Shaft Diameter:  1.378"/35 mm
  • Pump Dimensions:  19" x 17.7" x 8.4"
  • Crankcase Oil Capacity: 127 oz.
  • Stroke:  1,575"/40 mm
    •
    Note:  Shipping weight 155 lbs.

    Click here for Owners Manual

     
    Item # GPM PSI RPM BORE HP MIN INLET
    KLS36 32.2 2200 1000 1.417"/36mm 48.5 EBHP 6.0 PSI
    KLS40 35.0 2000 900 1.585"/40mm 47.9 EBHP 5.7 PSI
    KLS45 40.1 1750 800 1.772"/45mm 48.1 EBHP 6.0 PSI
    KLS50 43.3 1450 700 1.969"/50mm 43.0 EBHP 5.8 PSI

     

    MSS  SERIES          MSS SERIES pump image

    Triplex Plunger Pump with Gearbox for Jetting (intermittent use).  Gear reducer options available for 1500 and 1800 RPM

  • Max. Inlet Pressure 45 PSI  
  • Max. Fluid Temperature:  140ºF
  • Inlet Port Thread:  2 1/2"  NPT-F
  • Discharge Port Thread:  1 1/4" NPT-F
  • Shaft Diameter:  1.969"/50 mm
  • Pump Dimensions:  27.7" x 23.8" x 11.9"
  • Crankcase Oil Capacity: 333 oz.
  • Stroke:  2.362"/60 mm
    •
    Note:  Shipping weight 620 lbs.

    Gearbox may be positioned as shown or at 45º, 90º, 135º, or 180º from position shown.

    Click here for Owners Manual

     
    Item # GPM PSI BORE HP MIN INLET
    MSS36 35.4 5000 1.417"/36mm 121.2 EBHP 6.5 PSI
    MSS40 43.9 3900 1.575"/40mm 117.3 EBHP 6.8 PSI
    MSS45 55.5 3050 1.772"/45mm 115.9 EBHP 7.1 PSI
    MSS50 68.7 2470 1.969"/50mm 116.2 EBHP 7.6 PSI
    MSS55 83.0 2000 2.165"/55mm 113.7 EBHP 7.8 PSI

     

    MSS-HD  SERIES          MSS-HD SERIES pump image

    Hydraulic Drive Pump

  • Max. Inlet Pressure 45 PSI  
  • Max. Fluid Temperature:  140ºF
  • Inlet Port Thread:  2 1/2"  NPT-F
  • Discharge Port Thread:  1 1/4" NPT-F
  • Shaft:  Hollow SAE J744 Splined 14 Tooth
  • Pump Dimensions:  27.9" x 21.9" x 12.1"
  • Crankcase Oil Capacity: 333 oz.
  • Stroke:  2.362"/60 mm
    •
    Note:  Shipping weight 620 lbs.

      Click here for Owners Manual

     
    Item # GPM PSI RPM BORE HYD.  HP MIN INLET
    MSS36HD 35.9 5000 1800 1.417"/36mm 104.7 6.5 PSI
    MSS40HD 44.4 3900 1800 1.575"/40mm 101.0 6.8 PSI
    MSS45HD 56.3 3050 1800 1.772"/45mm 100.2 7.1 PSI
    MSS50HD 69.5 2470 1800 1.969"/50mm 100.2 7.6 PSI
    MSS55HD 84.0 2000 1800 2.165"/55mm 98.0 7.8 PSI

     

    LHS  SERIES          LHS Series image

    Triplex Plunger Pump with Internal Gear Reduction

  • Max. Inlet Pressure 45 PSI  
  • Max. Fluid Temperature:  140ºF
  • Inlet Port Thread:  80 mm  BSP-F
  • Discharge Port Thread:  36 mm BSP-F
  • Shaft Diameter:  1.969"/50 mm
  • Pump Dimensions:  36.3" x 25.8" x 13.5"
  • Crankcase Oil Capacity: 467 oz.
  • Stroke:  3.546"/90 mm
    •
    Note:  Shipping weight 800 lbs.

    Gearbox  may be positioned as shown or at 45º, 90º, 135º, or 180º from position shown.

     Click here for Owners Manual

     
    Item # GPM PSI RPM BORE  HP MIN INLET
    LHS50 77.4 3300 1750 1.969"/50mm 175 5.5 PSI
    LHS55 93.8 2750 1750 2.165"/55mm 175 5.8 PSI
    LHS60 112.0 2320 1750 2.362"/60mm 175 6.1 PSI

     

     

    Hydraulic Pumps

     

    HYDRAULIC  SERIES          Hydraulic Series pump image

    Turn your hydraulic power into cleaning power.  This innovative design provides durability and power in a compact package.  The one-piece design couples a powerful, reliable drive system to a professional grade pump that is lubricated internally by the hydraulic system.  This pump requires no oil changes and no regular maintenance.  The HydraClean comes complete with an adjustable unloader and thermal relief valve.

  • Max. Inlet Pressure 150 PSI  
  • Max. Fluid Temperature:  145ºF
  • Inlet Port Thread:  3/4"  NPT-F
  • Discharge Port Thread:  3/8" NPT-F
  • Hydraulic Inlet Port:  1/2" BSP-F
  • Hydraulic Return Port: 1/2" BSP-F
  • Pump Dimensions:  11.2" x 4.7" x 7.0"
    •

    Flow to Flow graph

    Pressure to Pressure graph

    Note:  Shipping weight 19.0 lbs.

    Click here for Product Manual

     
    Item # Hydraulic Max GPM Ratio Water Max GPM Hydraulic Max Pressure Ratio Water Max Pressure
    HWB1512 6.6 0.5 3.3 2485 PSI 1.75 4350 PSI
    HWB1812 6.6 .0.67 4.4 3020 PSI 1.2 3625 PSI
    HWB2112 6.6 1.0 6.6 3625 PSI 0.8 2900 PSI
    HWB2512 6.6 1.3 8.6 3625 PSI 0.6 2175 PSI

     

    HYDRAULIC  SERIES          Hydraulic Series pump image

     

  • Max. Inlet Pressure 150 PSI  
  • Max. Fluid Temperature:  110ºF
  • Inlet Port Thread:  1/2"  G-F
  • Discharge Port Thread:  1/2"  G-F
  • Hydraulic Inlet Port:  1/2"  G-F
  • Hydraulic Return Port:  1/2"  G-F
  • Pump Dimensions:  9.3" x 4.2" x 5.1"
    •

    HPX Flow conversion chart

    HPX Pressure conversion chart

    **Actual Performance may vary slightly depending on conditions.**

    Note:  Shipping weight 19.0 lbs.

      Click here for Product Manual

     
    Item # Hydraulic Max GPM Ratio Water Max GPM Hydraulic Max Pressure Ratio Water Max Pressure
    HPX810 6.1 0.2 1.22 2900 PSI 4.0 11600 PSI

     

    HYDRAULIC VALVES          Hydraulic Valves image

     

    To use with systems where the hydraulic flow is not constant or higher than 6.6 GPM, it mounts directly to the back of the pump and provides constant flow by absorbing oil shocks from the system.  Use the HSV valve if the hydraulic system does not have a safety valve installed.

    Note:  Shipping weight for HRV 1.7 lbs; HSV  2.4 lbs.

     
    Item # Inlet Outlet Valve Outlet
    HRV66AN 1/2" BSP-M 1/2" BSP-M  
    HSV66AN 1/2" BSP-M 1/2" BSP-M 1/2" BSP-F

     

    HYDRAULIC   COUPLERS          Hydraulic Couplers image

    Note:  Shipping weight 1.0 lbs

     
    Item # Description GPM Max Pressure Inlet Outlet Max. Temp.
    HFFQ001 Plug 14.0 4350 PSI 1/2" NPT-F 1/2" QC-M 250ºF
    HFFQ002 Coupler 14.0 4350 PSI 1/2" QC-F 1/2" BSP-M 250ºF
    HFFQ003 Plug 14.0 4350 PSI 1/2" BSP-M 1/2" QC-M 250ºF
    HFFQ004 Coupler 14.0 4350 PSI 1/2" NPT-F 1/2" QC-F 250ºF

    Chappell Supply of Texas Site Map

     

    For more information call 1-877-439-8500

     

    Biological Wastewater Treatment Pressure Washers Water Recycling Systems
    Aqueous Parts Washers Explosion-Proof Pressure Cleaning System Heavy Duty Industrial Cleaning Systems
    Water Cannon System Mosmatic Corp. Pump Index Latimat Containment System
    Hose Product Line Industrial Steam Cleaning Tanks & Tank Accessories
    Return to Chappell Supply of Texas Main Page

     

     

    Chappell Supply of Texas

    1-877-439-8500

    548 S Saginaw Blvd

    Saginaw, TX  76179

           Phone: 817-439-2200      Fax:  817-439-2400

             email:   info@chappellsupplyoftexas.com

     
       

    Site Hosted by:            Internet Techs.net