Chappell Supply of Texas

CAT PUMPS

 

Submersible Pumps:   1K ,  2K

Centrifugal Pumps:   3K Single Stage,  3K Two Stage,  4K Flanged,  5K Self-Priming

Reciprocating Process Pumps:  150 R-Series,   157 R-Series

 

 

Assorted submersible pumps

Submersible Pumps

Features:

  • 304SSL construction offers corrosion resistance and increases operating life over typical cast iron models.
  • Unique bulge formed components eliminates harsh radius and welds and provides greater efficiency and durability.
  • Lubricated double mechanical seal offers dependable performance with a variety of liquids. 
  • Air filled, continuous-duty motors for reliable, long term operation.
  • Single phase motor features permanent split capacitor and thermal protection with automatic reset for added protection and extended motor life.
  • Versatile, reliable operation whether full or partially submerged.
  • Sealed float switch for automatic operation.
    •

    Quality Materials:

  • Casing is 304SSL for durability over traditional cast iron.
  • Semi-open impeller is 304SSL for long life, durability and economy. (1K100 and 1K102 feature RTP-Noryl)
  • Shaft is 304SSL for dependable long life. 
  • Motor frame is 304SSL for dependability.
  • Fasteners are all 304SS for durability.
  • Shaft Seals are special blend NBR and FPM for compatibility and long life.
  • Sealed Bearings for longer life.
    •

    ***Note:  Information on the Vertical Stage Pumps currently unavailable.***

     

     

    1K Series pump image

    1K Series Stainless Steel Submersible Pumps 

    Multiple sizes from 1/3 to 1 1/2 hp offers application flexibility.

  • Flow Range:  up to 88 GPM                                                                                                                                         
  • Pressure Range:  up to 24 PSI,  up to 55 Ft. Head                                                                                                 
  • RPM:  3450 RPM                                                                                                                                                              
  • Discharge Fitting:  1/3 HP - 1 1/4 NPT,   1/2 - 1 1/2 HP  -  1 1/2 NPT                                                                     
  • Motor Phase: Single - Class F 115V,   Three - Class F 208/230V,   Three - Class F  460V                             
  • Cycle:  60 Hz                                                                                                                                                                     
  • Cable Length:  1 PH  (Gauge AWG 16, UL/CSA 3-Prong)  20 ft.,   3 PH  (Gauge AWG 16, UL/CSA)  20 ft.
  • Float Operation:  Automatic or Manual                                                                                                                       
  • Maximum Starts/Hour:  20                                                                                                                                              
  • Maximum Temperature:  Continuous  -  122ºF,  Intermittent  - 140ºF                                                                  
  • Maximum Solids Diameter:   3/8"                                                                                                                                  
    • Click here for Product Manual

     
    Capacity in Gallons per Minute (GPM)
    Model Feet of Head
      5 10 15 20 25 30 35 40 45 50 55
    1K100 - 103 45 39 31 21 5            
    1K201 - 205   73 67 60 51 40 27 9      
    1K301 - 305       74 67 58 49 39 28 16  
    1K404 - 405         82 75 65 55 42 27  
    1K504 - 505         88 81 74 65 54 43 25

     

    1K Automatic Models
    * Indicates only single phase has motor over-load and auto-reset.
    Model HP Phase Volts Amps Pump Motor Dimensions (In) WT. (lbs)
    A B C D E (NPT)
    1K100 1/3 1* 115 4.0 10.25 8.06 6.37 2.26 1.25 11
    1K101 1/3 1* 115 4.0 10.25 8.06 6.37 2.26 1.25 11
    1K201 1/2 1* 115 9.0 17.18 13.62 8.25 2.62 1.50 27
    1K301 3/4 1* 115 12.2 17.18 13.62 8.25 2.62 1.50 27

     

    1K Manual Models
    * Indicates only single phase has motor over-load and auto-reset.
    Model HP Phase Volts Amps Pump Motor Dimensions (In) WT. (lbs)
    A B C D E (NPT)
    1K102 1/3 1* 115 4.0 10.25 8.66 6.37 2.37 1.25 11
    1K103 1/3 1* 115 4.0 10.25 8.66 6.37 2.37 1.25 11
    1K203 1/2 1* 115 9.0 17.18 13.62 8.25 2.37 1.50 27
    1K204 1/2 3 208/230 3.0/3.1 13.87 12.37 8.25 2.37 1.50 27
    1K205 1/2 3 460 1.55 13.87 12.37 8.25 2.37 1.50 27
    1K303 3/4 1* 115 12.2 17.18 13.37 8.25 2.37 1.50 28
    1K304 3/4 3 208/230 3.9/3.8 13.87 12.37 8.25 2.37 1.50 28
    1K305 3/4 3 460 2.0 13.87 12.37 8.25 2.37 1.50 28
    1K404 1 3 208/230 4.8/4.8 14.81 13.37 8.25 2.37 1.50 31
    1K405 1 3 460 2.5 14.81 13.37 8.25 2.37 1.50 31
    1K504 1 1/2 3 208/230 5.4/5.3 14.81 13.37 8.25 2.37 1.50 31
    1K505 1 1/2 3 460 2.7 14.81 13.37 8.25 2.37 1.50 31

     

     

    2K Series pump image

    2K Series Stainless Steel Submersible Pumps 

    Multiple sizes from 1/2 to 2 hp offers application flexibility.

  • Flow Range:  up to 180 GPM                                                                                                                   
  • Pressure Range:  up to 19.5 PSI,  up to 46 Ft. Head                                                                                  
  • RPM:  3450 RPM                                                                                                                                    
  • Discharge Fitting:  2" NPT                                                                                                                        
  • Motor Phase: Single - Class F 115V, 208-230V,  Three - Class F 208/230V, 460V                                      
  • Cycle:  60 Hz                                                                                                                                          
  • Cable Length:  1 PH  (Gauge AWG 14/16, UL/CSA 3-Prong)  25 ft.,   3 PH  (Gauge AWG 16, UL/CSA)  25 ft.
  • Float Operation:  Automatic or Manual                                                                                                                            
  • Maximum Starts/Hour:  20                                                                                                                                                   
  • Maximum Temperature:  Continuous  -  104ºF,  Intermittent  - 140º F                                                            
  • Maximum Solids Diameter:   2"                                                                                                                 

    •  
    Click here for Product Manual

     
    Capacity in Gallons per Minute (GPM)
    Model Feet of Head
      8 9 10 12 14 16 18 21 24 27 30 32 35 40 46
    2K100 - 105 88 83 78 68 57 45 31 8              
    2K200 - 205       100 88 76 64 45 25 8          
    2K302 - 305       120 113 105 97 84 69 52 30 8      
    2K403 - 405   180 177 171 165 158 152 141 130 118 105 96 81 52 8

     

    2K Automatic Models
    * Indicates only single phase has motor over-load and auto-reset.

    ** Indicates 14 Gauge Wire
    Model HP Phase Volts Amps Pump Motor Dimensions (In) WT. (lbs)
    A B C
    2K100 1/2 1* 115 8.30 21.63 9.0 3.88 36
    2K102 1/2 1* 208/230 4.40/4.40 19.13 9.0 3.88 36
    2K200 1 1* 115 11.80** 22.81 9.0 3.88 41
    2K202 1 1* 208/230 6.40/6.40 22.81 9.0 3.88 44
    2K302 1 1/2 1* 208/230 7.00/7.00 21.25 9.0 3.88 45

     

    2K Manual Models
    * Indicates only single phase has motor over-load and auto-reset.

    ** Indicates 14 Gauge Wire
    Model HP Phase Volts Amps Pump Motor Dimensions (In) WT. (lbs)
    A B C
    2K101 1/2 1* 115 8.30 21.63 9.0 3.88 36
    2K103 1/2 1* 208/230 4.40/4.40 21.63 9.0 3.88 36
    2K104 1/2 3 208/230 3.00/3.00 19.13 9.0 3.88 32
    2K105 1/2 3 460 1.28 19.13 9.0 3.88 32
    2K201 1 1* 115 11.80** 22.81 9.0 3.88 41
    2K203 1 1* 208/230 6.40/6.40 20.25 9.0 3.88 41
    2K204 1 3 208/230 4.20/4.20 19.13 9.0 3.88 36
    2K205 1 3 460 1.99 19.13 9.0 3.88 36
    2K303 1 1/2 1* 208/230 7.00/7.00 20.25 9.0 3.88 47
    2K304 1 1/2 3 208/230 4.80/4.80 20.25 9.0 3.88 42
    2K305 1 1/2 3 460 2.34 20.25 9.0 3.88 42
    2K403 2 1* 208/230 9.10/9.10** 24.00 9.0 3.88 52
    2K404 2 3 208/230 7.40/7.40 20.25 9.0 3.88 47
    2K405 2 3 460 3.50 20.25 9.0 3.88 47

     

     

    Centrifugal pumps

    Centrifugal Pumps

    Features:

  • 304SSL liquid-end construction offers corrosion resistance and increases operating life over typical cast iron models.
  • Unique bulge formed components eliminates harsh radius and welds and provides greater efficiency and durability.
  • Back pullout design permits easy repair of impeller and seal.
  • Under casing foot mount and centerline discharge reduces misalignment and assures self-venting.
  • Close coupled, motorized packages for compact and easy installation.

    •  

     

    3K Series pump image

    3K Series - Single Stage - Stainless Steel - End-Suction Centrifugal Pumps 

    High quality mechanical shaft seal and o-rings for a variety of standard or high temperature and chemical duty applications.

  • Flow Range:  5.5 to 90.0 GPM                                           
  • Pressure Range:  10 to 63 PSI,  23 to 145 Ft. Head             
  • Max Working Pressure:  125 PSI                                        
  • Min. Inlet Pressure to Prime:  Flooded                                 
  • RPM:  1725 or 3450 RPM                                                   
  • Inlet Fitting for 3K111 - 3K163, 3K361 - 3K363:   1  1/4" NPT
  • Inlet Fitting for 3K171 - 3K193, 3K391 - 3K393:   1  1/2" NPT
  • Discharge Fitting (all models):  1" NPT                                 
  • Horsepower Range:  1/3 to 3 HP                                         
  • Cycle:  60 Hz                                                                    
  • Maximum Temperature:  Continuous  -  160ºF                      

    •  
    Click here for Product Manual

     
    Motor Options
    56J Frame TEFC Class F
    1/3 - 1/2 HP 115/208-230V, 1 PH, 60 HZ
    3/4  -  1  -  1 1/2 HP 115/230V, 1 PH, 60 HZ
    2.0 HP 230V, 1 PH, 60 HZ
    1/3 to 3.0 HP 208-230/460V, 1 PH, 60 HZ

     

    3K 1725 RPM MPU
    Model  Pump wt (lbs) only Motor P/N 1ph Motor wt.(lbs)  1ph MPU lgth (in) 1ph MPU wt (lbs) 1ph Motor P/N 3ph Motor wt.(lbs)  3ph MPU lgth (in) 3ph MPU wt (lbs) 3ph
    3K361 9.0 899117 21.00 13.82 30.00 899119 21.00 13.81 30.00
    3K391 9.0 899118 26.00 14.82 35.00 899121 22.00 13.81 31.00

     

    3K 3450 RPM MPU
    Model  Pump wt (lbs) only Motor P/N 1ph Motor wt.(lbs)  1ph MPU lgth (in) 1ph MPU wt (lbs) 1ph Motor P/N 3ph Motor wt.(lbs)  3ph MPU lgth (in) 3ph MPU wt (lbs) 3ph
    3K111 8.4 899122 30.00 14.71 38.40 899126 26.00 14.71 34.40
    3K121 8.7 899124 37.00 15.83 45.70 899128 31.00 14.71 39.70
    3K131 9.0 899125 38.00 15.83 47.00 899129 35.00 15.08 44.00
    3K141 8.4 899123 33.00 15.08 41.40 899127 28.00 14.71 36.40
    3K151 8.7 899124 37.00 15.83 45.70 899128 31.00 14.71 39.70
    3K161 9.0         899130 40.00 16.33 49.00
    3K171 8.4 899124 37.00 15.83 45.40 899128 31.00 14.71 39.40
    3K181 8.7         899130 40.00 16.33 48.70
    3K191 9.0         899130 40.00 16.33 49.00

     

     

    3K Series pump image

    3K Series - Two Stage - Stainless Steel - End-Suction Centrifugal Pumps 

    High quality mechanical shaft seal and o-rings chemical duty applications.

  • Flow Range:  5.5 to 66.0 GPM                                                               
  • Pressure Range:  42 to 106 PSI,  98 to 245 Ft. Head                                
  • Max Working Pressure:  125 PSI                                                             
  • Min. Inlet Pressure to Prime:  Flooded                                                      
  • RPM:  3450 RPM                                                                                    
  • Inlet Fitting for 3K502CT2, 3K502CT4,3K512CT4, 3K522CT4 :   1  1/4" NPT
  • Inlet Fitting for 3K532CT4:   1 1/2" NPT                                                     
  • Discharge Fitting (all models):  1" NPT                                                       
  • Horsepower Range:  2 to 5 HP                                                                  
  • Cycle:  60 Hz                                                                                          
  • Maximum Temperature:  Continuous  -  140ºF                                            

    •  

    Click here for Product Manual

     
    Motor Options
    IP55 Frame TEFC Class F
    2.0 HP 230V, 1 PH
    2.0 HP 230/460V, 3 PH
    3.0 HP 230/460V, 3 PH
    5.0 HP 230/460V, 3 PH

     

    3K Two Stage

     
    Model  HP Phase Pump-Motor Dimensions (in)
    A C F H H1 H2 H3 M M1 N N1 R S W WT (lbs)
    3K502CT4 2 3 3 7/16 9 1/8 14 15/16 9 13/16 4 5/8 5 3/16 8 7/8 2 3/16 1 9/16 5 1/2 7 1/16 5 1/2 3/8 3 3/4 37
    3K512CT4 3 3 3 7/16 9 1/8 14 15/16 9 13/16 4 5/8 5 3/16 8 7/8 2 3/16 1 9/16 5 1/2 7 1/16 5 1/2 3/8 3 3/4 37
    3K522CT4 3 3 3 7/16 9 1/8 14 15/16 9 13/16 4 5/8 5 3/16 8 7/8 2 3/16 1 9/16 5 1/2 7 1/16 5 1/2 3/8 3 3/4 39
    3K532CT4 5 3 3 7/16 9 1/8 17 3/8 9 13/16 4 5/8 5 3/16 9 9/16 2 11/16 1 15/16 6 5/16 8 1/4 5 11/16 1/2 4 5/16 71
    3K502CT2 2 1 3 7/16 9 1/8 15 3/8 9 1/2 4 5/8 4 5/8 9 1/2 2 3/16 1 9/16 5 1/2 7 1/16 5 1/2 3/8 3 3/4 37

     

     

    4K Series pump image

    4K Series - Single Stage - Stainless Steel - End-Suction Centrifugal Pumps Flanged 

    High quality mechanical shaft seal and o-rings for a variety of standard or high temperature and chemical duty applications.

    Convenient ANSI 150# mounting flanges for secure, easy installation.

  • Flow Range:  13 to 380 GPM                                                
  • Pressure Range:  4.3 to 124 PSI,  10 to 285 Ft. Head              
  • Max Working Pressure:  230 PSI                                           
  • RPM:  1725 or 3450 RPM                                                      
  • Inlet Fitting for 4K111 - 4K153, 4K341 - 3K353:   2.00" ANSI     
  • Inlet Fitting for 4K161 - 4K251, 4K381 - 4K353:   2.50" ANSI     
  • Discharge Fitting 4K111 - 4K153, 4K341 - 3K353:   1.25" ANSI
  • Discharge Fitting 4K161 - 4K213, 4K381 - 4K413:   1.50" ANSI
  • Discharge Fitting 4K221 - 4K253, 4K421 - 4K453:   2.00" ANSI
  • Horsepower Range for 1725:  1 to 2 HP                                   
  • Horsepower Range for 3450:  3 to 15 HP                                 
  • Cycle:  60 Hz                                                                       
  • Maximum Temperature:  Continuous  -  160ºF                         

    •  

    Click here for Product Manual

     
    Motor Options
    1725 RPM, TEFC, Class F
    1.0 HP, 143 JM Frame 200-230/460V, 3 PH
    1 1/2 HP, 145 JM Frame 200-230/460V, 3 PH
    2.0 HP, 145 JM Frame 200-230/460V, 3 PH
    3450 RPM, TEFC, Class F
    3.0 HP, 182 JM Frame 208-230/460V, 3 PH
    5.0 HP, 184 JM Frame 208-230/460V, 3 PH
    7 1/2 HP, 213 JM Frame 208-230/460V, 3 PH
    10.0 HP, 215 JM Frame 208-230/460V, 3 PH
    15.0 HP, 215 JM Frame 208-230/460V, 3 PH

     

    4K 1725 RPM MPU
    Model Motor P/N Motor Wt. (lbs) MPU Lgth (in) MPU Wt. (lbs)
    4K341MT3 899145 34.00 18.78 77.00
    4K351MT3 899146 38.00 18.78 81.00
    4K381MT3 899145 34.00 18.53 65.00
    4K401MT3 899146 38.00 19.53 81.00
    4K411MT3 899147 44.00 19.53 87.00
    4K421MT3 899145 34.00 19.28 65.00
    4K441MT3 899146 38.00 19.53 81.00
    4K451MT3 899147 44.00 19.53 87.00

     

    4K 3450 RPM MPU
    Model Motor P/N Motor Wt. (lbs) MPU Lgth (in) MPU Wt. (lbs)
    4K111MT3 899140 73.00 20.54 96.00
    4K121MT3 899141 92.00 20.79 123.00
    4K131MT3 899141 92.00 20.79 123.00
    4K141MT3 899142 118.00 22.25 161.00
    4K151MT3 899143 140.00 23.75 183.00
    4K161MT3 899141 92.00 20.54 115.00
    4K171MT3 899141 92.00 20.54 115.00
    4K181MT3 899142 118.00 22.00 149.00
    4K191MT3 899143 140.00 23.75 171.00
    4K201BT3 899144 159.00 24.44 202.00
    4K211BT3 899144 159.00 24.44 202.00
    4K221MT3 899142 118.00 22.75 149.00
    4K231MT3 899143 140.00 24.50 171.00
    4K241MT3 899143 140.00 24.50 183.00
    4K251BT3 899144 159.00 24.44 202.00

     

    4K Pump Only Dimensions
    Model Pump Wt. Only (lbs) Measurements in Inches
    A B C D E F
    4K111 23.0 8.38 9.94 4.44 5.50 7.50 3.13
    4K121 31.0 10.00 11.50 5.19 7.50 9.44 3.13
    4K131 31.0 10.00 11.50 5.19 7.50 9.44 3.13
    4K141, 4K341 43.0 11.56 13.38 6.31 7.50 9.44 3.13
    4K151, 4K351 43.0 11.56 13.38 6.31 7.50 9.44 3.13
    4K161 23.0 8.38 9.94 4.44 6.31 8.25 3.13
    4K171 23.0 8.38 9.94 4.44 6.31 8.25 3.13
    4K181, 4K381 31.0 10.00 11.50 5.19 7.50 9.44 3.13
    4K191 31.0 10.00 11.50 5.19 7.50 9.44 3.13
    4K201, 4K401 43.0 11.56 13.38 6.31 8.38 10.44 3.94
    4K211, 4K411 43.0 11.56 13.38 6.31 8.38 10.44 3.94
    4K221, 4K421 31.0 10.00 11.50 5.19 7.50 9.44 3.94
    4K231 31.0 10.00 11.50 5.19 7.50 9.44 3.94
    4K241, 4K441 43.0 11.69 13.38 6.31 8.38 10.44 3.94
    4K251, 4K451 43.0 11.69 13.38 6.31 8.38 10.44 3.94

     

     

    5K Series pump image

    5K Series - Single Stage - Stainless Steel - End-Suction Centrifugal Pumps 

    Self-Priming Models

    High quality mechanical shaft seal and o-rings for a variety of standard or high temperature and chemical duty applications.

    Durable Noryl/Fiberglass Diffuser

  • Flow Range: 1.5 to 18.5 GPM                                
  • Pressure Range:  27 to 82 PSI,  63 to 190 Ft. Head
  • Suction Lift (at 68ºF):  25 ft.                                   
  • Max Working Pressure:  85 PSI                             
  • RPM:   3450 RPM                                                 
  • Inlet Fitting (all models):   1.25" NPTF                     
  • Discharge Fitting (all models):  1" NPTF                  
  • Horsepower Range:  1 to 2 HP                                
  • Cycle:  60 Hz                                                        
  • Maximum Temperature:  Continuous  -  113ºF          

    •  

    Pump Only Weight:  8.95 lbs

    Click here for Product Manual

     
    Motor Options
    56J Frame TEFC Class F
    1.0 HP 115/208-230V, 1 PH, 60 HZ
    2.0 HP 230V, 1 PH, 60 HZ
    1.0 HP 208-230/460V, 3 PH, 60 HZ
    2.0 HP 208-230/460V, 3 PH, 60 HZ

     

    5K 3450 RPM MPU
    Model Motor P/N 1ph Motor wt.(lbs)  1ph MPU lgth (in) 1ph MPU wt (lbs) 1ph Motor P/N 3ph Motor wt.(lbs)  3ph MPU lgth (in) 3ph MPU wt (lbs) 3ph
    5K111-13 899123 33.00 18.32 41.95 899127 28.00 17.96 36.95
    5K121-23 899125 38.00 19.08 46.95 899129 35.00 18.32 43.95

     

     

    Reciprocating pump image

    Reciprocating Process Pumps

    Features:

  • Triplex plunger design give smooth low-pulsation liquid flow.
  • Interchangeable inlet and discharge valve assemblies accessible without removing the head for easy servicing.
  • Standard oil bath crankcase lubrication assures optimum lubrication.
  • Chevron, V-packing design offers strength under pressure and requires no packing adjustment.

    •  

    Quality Materials:

  • Duplex stainless steel manifold head offers strength and corrosion resistance.
  • Special concentric, high-density, polished, solid ceramic plunger provide a true wear surface and extended seal life.
  • Special SFTK preset V-Packings.
  • SG cast iron crankcase provides strength, vibration dampening and flame and spark resistance.
  • Chrome-moly, nitrated crankshaft offers high-strength and greater surface hardness.
  • Special one-piece, high strength Mazak ZA12 connecting rods provide exceptional bearing quality and long life.
    •

     

    Easy Maintenance:

  • Ceramic plungers, seals and V-Packings are serviceable from the top of the crankcase permitting easy in-field servicing.
  • V-Packings require no adjustment reducing maintenance time.
    •

     

     

    150 Frame R-Series - Duplex Stainless Steel - Reciprocating Process Pumps 

    Duplex stainless steel seats and springs and Delrin valves offer corrosion resistance and extended life.

  • Inlet Pressure Range:  Flooded to 50 PS
  • Minimum RPM:  75 RPM                       
  • Stroke:  5.91"                                        
  • Crankcase Capacity:  22.4 gals.              
  • Lubrication:  Splash                               
  • Maximum Temperature:  120ºF                
  • Inlet Ports (2):  6.0"                                
  • Discharge Ports (2) (Nominal):  4.0"          
  • Shaft Diameter:  3.397"                           
  • Shaft Length:  8.150"                              
  • Weight:  3087 lbs.                                  
  • Dimensions:  68.11"  x  42.13"  x  22.05"
    •

     
    Click here for Product Manual

     
    Model   Flow GPM Pressure Range Maximum RPM Bore
    152R060 Standard 115 100 to 1200 PSI 360 2.36"
    API 86 270
    152R080 Standard 200 100 to 1200 PSI 355 3.15"
    API 150 270
    152R100 Standard 260 100 to 1000 PSI 295 3.94"
    API 240 270 3.94"

     

     

    157 Frame R-Series - Duplex Stainless Steel - Reciprocating Process Pumps 

    Duplex stainless steel seats, springs and valves offer corrosion resistance and extended life.

  • Inlet Pressure Range:  Flooded to 50 PSI
  • Minimum RPM:  75 RPM                        
  • Stroke:  5.91"                                        
  • Crankcase Capacity:  22.4 gals.              
  • Lubrication:  Splash                               
  • Maximum Temperature:  120ºF               
  • Inlet Ports (2):  6.0"                                
  • Discharge Ports (2) (Nominal):  4.0"         
  • Shaft Diameter:  3.397"                           
  • Shaft Length:  8.150"                               
  • Weight:  3087 lbs.                                   
  • Dimensions:  68.11"  x  42.13"  x  22.05"  

    •  

    ***Note:  Relief Pressure should be set at maximum 10% over System Pressure.***

    Click here for Product Manual

     
    Model   Flow GPM System Pressure Maximum RPM Bore
    157R060 Standard 100 2700 PSI 310 2.36
    API 86 270

    Chappell Supply of Texas Site Map

     

    For more information call 1-877-439-8500

     

    Biological Wastewater Treatment Pressure Washers Water Recycling Systems
    Aqueous Parts Washers Explosion-Proof Pressure Cleaning System Heavy Duty Industrial Cleaning Systems
    Water Cannon System Mosmatic Corp. Pump Index Latimat Containment System
    Hose Product Line Industrial Steam Cleaning Tanks & Tank Accessories
    Return to Chappell Supply of Texas Main Page

     

     

    Chappell Supply of Texas

    1-877-439-8500

    548 S Saginaw Blvd

    Saginaw, TX  76179

           Phone: 817-439-2200      Fax:  817-439-2400

             email:   info@chappellsupplyoftexas.com

     
       

    Site Hosted by:            Internet Techs.net