SF Triplex Plunger Pumps, DX Triplex Plunger Pumps, SP Pumps

Triplex design provides smother liquid flow.

Triplex design with unique spring loaded inlet valves and the flow through ceramic plungers provides a smooth, steady flow.

Compact, hollow shafted pump for direct mounting to either gas or electric motor, eliminated the need for pulleys, belts, gearboxes.

Optional 3450 or 1725 RPM models.

Regulating Unloader is standard on each pump to assure system pressure control and pump protection.

Special Hi-Temp seal option for pumping 190º F water (2SF models only).

Optional Thermo Valve mounts directly into by-pass hose for optimum heat protection while in by-pass.

Convenient multiple porting provides installation flexibility.

Crankcase Capacity: 11.83 oz.                              

Max Liquid Temperature (Standard):  160º F            

Max Liquid Temperature (Hi-Temp):  190º F             
"Above 130º F call for inlet conditions and elastomer recommendations"

Inlet Ports:  (1)  3/8" NPTF                                      

Discharge Ports:  (2)  3/8" NPTF                             

By-pass Port:  (1)  1/4" NPTF                                  

Bore:  0.708"                                                          

Inlet Pressure Range (Standard):   Flooded to 75 PSI

Inlet Pressure Range (Hi-Temp):  30 to 75 PSI            

Dimensions (pump only):  9.13" x 6.65" x 6.50"          

Crankcase Capacity: 23.66 oz.                        

Max Liquid Temperature:  160º F                      
"Above 130º F call for inlet conditions and elastomer recommendations"

Inlet Ports:  (1)  1/2" NPTF                               

Discharge Ports:  (2)  3/8" NPTF                       

By-pass Port:  (1)  3/8" NPTF                            

Auxiliary Port: (1)  1/4"  NPTF                            

Bore:  0.787"                                                    

Inlet Pressure Range (Electric):  -2 to 75 PSI       

Inlet Pressure Range (Gas):  Flooded to 75 PSI    

Dimensions (pump only):  8.27" x 11.06" x 12.28"

Triplex plunger design provides a smooth liquid flow.

Specially formulated Hi-Pressure Seals (V-Packings) and concentrically ground ceramic plungers assure maximum seal life.

Ultimate compact, direct-drive unit for maximum portability.

Modular Regulating Unloader with built-in by-pass standard on all units to assure system pressure control and pump protection.

Built-in fixed chemical injector offers cleaning flexibility.

Built-in flange mount for easy, direct mounting to most gas engines.  Eliminates the need for pulleys, belts, gearboxes (optional electric 2DX model)

Interchangeable, stacked valve design for ease in servicing (2DX & 3DX models only).

Inlet, swivel, garden hose fitting with filter screen (2DX & 3DX models only)

Triplex plunger design provides a smooth liquid flow.

Specially formulated Hi-Pressure Seals together with concentric, polished Ceramic Plungers assure maximum seal life.

Compact, hollow shafted pump for direct mounting to either 1" gas or 3/4" electric shaft. Eliminates the need for pulleys, belts or gearboxes.

Regulating Unloader with by-pass hose mounts directly onto pump for system pressure control and pump protection.

Stack valve design for ease in servicing.

Fixed Chemical Injector for cleaning flexibility